Show simple item record

dc.contributor.authorArghode, Vaibhav Kumar
dc.date.accessioned2023-04-06T12:55:06Z
dc.date.available2023-04-06T12:55:06Z
dc.date.copyright11/15/2022 12:00:00 AM
dc.date.issued2022
dc.identifier.issn26426641
dc.identifier.otherjesbc_3_3_034502.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4288754
dc.description.abstractIn this study, three different approaches are investigated for keeping the roof cool and reducing the heat flow inside a building located in Kanpur, India. In the first approach, various reflective paints are investigated and their performance degradation over a year is examined along with the costbenefit analysis. In the second approach, the roof surface is kept wet, and due to water evaporation, the roof was kept cool. In the third approach, the effect of shading on the rooftop surface temperature is studied. It is observed that without any cooling, the rooftop temperature can rise about 20 °C above the ambient air temperature. The application of white acrylic paints can reduce this temperature rise to about 5–7 °C. However, after a year due to degradation, this temperature rise is about 10–12 °C. Using evaporative cooling the rooftop temperature can be lowered even below the ambient air temperature by about 3 °C. However, this approach will require active management of the system and consumption of water. The cost for the first two approaches is estimated to be about 5–6 Rs./sq.ft with a payback time of 2 years. Shading can reduce the temperature rise to about 5 °C. Structures meant for other purposes such as photovoltaic panels can serve the additional benefit of cooling the roof. Shading seems to be a robust and lowmaintenance option, and cost analysis of structures meant primarily for shading the roof needs to be explored.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInvestigation of Cool Roof Based on Reflective Paints, Evaporative Cooling, and Shading
dc.typeJournal Paper
dc.journal.volume3
dc.journal.issue3
dc.journal.titleASME Journal of Engineering for Sustainable Buildings and Cities
dc.identifier.doi10.1115/1.4056132
dc.journal.fristpage34502
dc.journal.lastpage345027
dc.page7
dc.treeASME Journal of Engineering for Sustainable Buildings and Cities:;2022:;volume( 003 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record