Show simple item record

dc.contributor.authorB. H. Chen
dc.contributor.authorW. J. Luo
dc.contributor.authorX. Y. Xu
dc.contributor.authorR. Q. Hu
dc.contributor.authorX. L. Yang
dc.date.accessioned2022-12-27T20:35:17Z
dc.date.available2022-12-27T20:35:17Z
dc.date.issued2022/10/01
dc.identifier.other(ASCE)GM.1943-5622.0002521.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4287634
dc.description.abstractMany published studies on seismic conditions have focused on a pseudostatic method with a linear Mohr–Coulomb failure criterion. However, the pseudostatic method ignores the influence of time and spatial variables on seismic accelerations, and almost all soils have nonlinear strength properties rather than linear properties. Herein, a new approach was established for calculating the seismic bearing capacity that considers a linear distribution of the seismic coefficients. A nonsymmetrical failure mechanism and the nonlinear Mohr–Coulomb failure criterion were used to describe the collapse process and soil properties. A layerwise summation method was developed to calculate the work rates because the pseudodynamic method depicts the variation in seismic acceleration as well as the time and spatial variables. In this work, a first application for calculating the seismic bearing capacity of soil foundations with nonlinear strength properties was conducted using the kinematic approach of limit analysis. Based on the numerical results and discussions, the key conclusions were as follows: (1) the reliability of this approach was verified by making exact comparisons with theoretical results and lab data; (2) in general, nonlinear solutions were more conservative than linear solutions; and (3) a high value of initial cohesion c0 resulted in an increase in the seismic bearing capacity qlim, and qlim decreased when the ratio of tensile strength σt to initial cohesion c0 or the value of nonlinear parameter m increased for a given value of initial cohesion c0.
dc.publisherASCE
dc.titleSeismic Bearing Capacity of Strip Footing with Nonlinear Mohr–Coulomb Failure Criterion
dc.typeJournal Article
dc.journal.volume22
dc.journal.issue10
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0002521
dc.journal.fristpage06022029
dc.journal.lastpage06022029_12
dc.page12
dc.treeInternational Journal of Geomechanics:;2022:;Volume ( 022 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record