Show simple item record

dc.contributor.authorJuehao Huang
dc.contributor.authorJian Chen
dc.contributor.authorWeiJun You
dc.contributor.authorXiaodong Fu
dc.contributor.authorJiangxiong Zhang
dc.contributor.authorNing Tian
dc.date.accessioned2022-12-27T20:35:00Z
dc.date.available2022-12-27T20:35:00Z
dc.date.issued2022/09/01
dc.identifier.other(ASCE)GM.1943-5622.0002490.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4287624
dc.description.abstractFor equivalent linear and nonlinear site response analysis, both shear modulus and damping ratio are critical input factors. The elastic modulus and damping ratio of saturated soft clay are usually determined using cyclic triaxial tests. However, the dynamic behaviors of saturated clay are affected by excess pore-water pressure induced under cyclic loading. Therefore, the evolutions of both elastic modulus and damping ratio, under cyclic triaxial tests with and without drainage, are the main focus of the investigation. Two types of cyclic triaxial tests were performed, in which the primary distinction is whether the excess pore-water pressure caused by the previous stage’s cyclic loading is released prior to the application of the next stage’s cyclic loading. The impacts of several parameters, such as effective confining pressure and excess pore-water pressure, were investigated. As the effective confining pressure increases, so does the maximum elastic modulus. Excess pore-water pressure has a significant effect on maximum elastic modulus. The maximum elastic modulus under the condition with drainage increases linearly with that obtained without drainage. Besides that, the variations of normalized elastic modulus with effective confining pressure are negligible under the condition without drainage, while the impact of effective confining pressure is more apparent in the condition of drainage. Nevertheless, the influence of effective confining pressure on the damping ratio can be ignored over the range of axial strain. The damping ratio without drainage is higher than that obtained under the condition with drainage. Based on that, the variation of normalized elastic modulus versus axial strain can be depicted by an empirical function, while the evolution of the damping ratio is represented by a hyperbolic model.
dc.publisherASCE
dc.titleImpacts of Excess Pore-Water Pressure on Dynamic Properties of Saturated Clay
dc.typeJournal Article
dc.journal.volume22
dc.journal.issue9
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0002490
dc.journal.fristpage06022021
dc.journal.lastpage06022021_9
dc.page9
dc.treeInternational Journal of Geomechanics:;2022:;Volume ( 022 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record