Show simple item record

dc.contributor.authorRitwik Nandi
dc.contributor.authorDeepankar Choudhury
dc.date.accessioned2022-12-27T20:34:58Z
dc.date.available2022-12-27T20:34:58Z
dc.date.issued2022/09/01
dc.identifier.other(ASCE)GM.1943-5622.0002488.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4287623
dc.description.abstractThis paper presents a new approach for calculating seismic passive earth pressure, its point of application, and the approximate stress-state within the rupture wedge. The method of vertical slices combined with the limit-equilibrium (LE) technique was used as the framework for the analysis. While the available LE analyses used the rupture surface of predefined shapes, in this approach, the rupture surface is derived through the analysis. First, the mobilized soil behind the wall was split into thin vertical slices and the rupture plane of every slice was calculated by enforcing the Mohr–Coulomb failure criterion. Thereafter, by adding those rupture planes consecutively, starting from the wall toe, the passive rupture surface was achieved. The inclination of the rupture planes is guided by the soil friction angle, wall friction angle, seismic acceleration, and slice-interface friction angle. The distribution of slice-interface friction angle across the rupture plane was presumed to obey a power function. The exponent of the power function, the seismic passive earth pressure, and its point of application were derived concurrently by satisfying the static equilibrium conditions of the slices and applying a boundary condition. The results show that the outline of the rupture surface is guided by the slice-interface friction angle, and the shape is curvilinear for rough walls. With increasing seismic acceleration, the passive pressure decreases, and the point of application moves predominantly downward for loose sands. The obtained results were compared with those of previous numerical and experimental studies and were found to show good agreement, thus demonstrating the validity of the proposed method.
dc.publisherASCE
dc.titleAn Improved Method of Vertical Slices to Determine Seismic Passive Earth Pressure and Its Point of Application
dc.typeJournal Article
dc.journal.volume22
dc.journal.issue9
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0002488
dc.journal.fristpage06022025
dc.journal.lastpage06022025_10
dc.page10
dc.treeInternational Journal of Geomechanics:;2022:;Volume ( 022 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record