Show simple item record

dc.contributor.authorNishant Roy
dc.contributor.authorSumedha Koul
dc.date.accessioned2022-12-27T20:34:52Z
dc.date.available2022-12-27T20:34:52Z
dc.date.issued2022/07/01
dc.identifier.other(ASCE)GM.1943-5622.0002463.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4287620
dc.description.abstractThis study presents the numerical solution for the seismic bearing capacity of embedded strip footing in Hoek–Brown rock mass. The upper-bound solutions are presented by employing the finite-element limit analysis. The influence of various parameters namely, geological strength index (GSI), yield parameter of the rock (mi), rock strength ratio (σci/γB), embedment depth ratio (d/B), and the horizontal seismic coefficient (kh) on the seismic bearing capacity factor (N) of strip footing is assessed. The results are presented as design tables and charts for a wide range of parameters. A parametric study is performed and a discussion on the influence of each parameter on the seismic bearing capacity factor is made. The influence of the considered parameters on the failure pattern is highlighted. It is noted that the lateral extent of the failure surface increases with an increase in the depth of embedment which has a positive influence on the seismic bearing capacity of strip footing.
dc.publisherASCE
dc.titleEffect of Embedment Depth on the Seismic Bearing Capacity of Strip Footing in Rock Mass
dc.typeJournal Article
dc.journal.volume22
dc.journal.issue7
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0002463
dc.journal.fristpage06022010
dc.journal.lastpage06022010_10
dc.page10
dc.treeInternational Journal of Geomechanics:;2022:;Volume ( 022 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record