Show simple item record

dc.contributor.authorYu Tan
dc.contributor.authorHuyuan Zhang
dc.contributor.authorZhinan Ding
dc.contributor.authorZe Ji
dc.contributor.authorGuoliang Ma
dc.date.accessioned2022-12-27T20:34:49Z
dc.date.available2022-12-27T20:34:49Z
dc.date.issued2022/08/01
dc.identifier.other(ASCE)GM.1943-5622.0002447.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4287616
dc.description.abstractTests were conducted on bentonite–silica fume mixtures (BSFMs) to determine how particle size affects the volumetric shrinkage of bentonite–sand mixtures (BSMs) used as hydraulic barriers in waste disposal facilities. Free desiccation tests, liquid limit tests, plastic limit tests, and direct shear tests were conducted to compare the soil shrinkage characteristic curves, shrinkage limits, plasticity, and shear strength of BSFMs to that of the commonly used bentonite–standard sand mixtures (BSSMs) at 30% sand percentage. BSFMs exhibited higher air entry values (up to 55.9% higher), shrinkage limits (up to 14.6% higher), final void ratio (up to 43.6% higher), peak shear strength (up to 115% higher), and a smaller percentage of volumetric shrinkage (10.8%) than BSSMs due to the particle contact and constrained particle movement. The liquid and plastic limits of BSFMs, in contrast, were also higher (up to 99.2% and 27.1%) than that of BSSMs. Particle size plays a critical role in controlling the shrinkage limits of BSMs compared to clay fractions.
dc.publisherASCE
dc.titleParticle Size Effects on the Volumetric Shrinkage of Bentonite–Sand Mixtures
dc.typeJournal Article
dc.journal.volume22
dc.journal.issue8
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0002447
dc.journal.fristpage06022019
dc.journal.lastpage06022019_8
dc.page8
dc.treeInternational Journal of Geomechanics:;2022:;Volume ( 022 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record