• Login
    View Item 
    •   DSpace Home
    • ASCE
    • International Journal of Geomechanics
    • View Item
    •   DSpace Home
    • ASCE
    • International Journal of Geomechanics
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Experimental and Numerical Study on Pressure Distribution under Screw and Straight Pile in Dense Sand

    Thumbnail
    View/Open
    %28ASCE%29GM.1943-5622.0002520.pdf (2.058Mb)
    Date
    2022/06/30
    Author
    Hung Manh Ho
    Adnan Anwar Malik
    Jiro Kuwano
    Sandro Brasile
    Thanh Viet Tran
    Muhammad Adeel Mazhar
    Metadata
    Show full item record
    Abstract
    A similar theoretical approach is generally used to estimate the end-bearing capacity of straight and screw piles. However, under similar ground conditions (stress level and bearing-capacity factor) and pile tip area after the pile is installed, the end-bearing capacity of the screw pile is less than the straight pile. In this study, the experimental tests were modeled in a three-dimensional (3D) finite-element code to better understand the pressure distribution and mobilized shear strength under straight and screw piles embedded in similar ground conditions. Moreover, the effect of helix position on the pile bearing capacity and pressure beneath the helix and shaft of the screw pile was also investigated. A helix-to-shaft diameter ratio (Dh/DSS) of 2.8 was used. A good agreement between experimental and numerical results was found. The results indicated that the pressure distribution under the screw pile with a thick helix (non-deformed helix) and straight pile are similar when the helix is positioned (dh) at the pile tip (dh = 0). As the helix is moved further away from the pile tip (dh > 0), the pressure under the helix gradually decreases, while the pressure under the shaft increases and then decreases within a certain dh/Dh. The mobilized shear strength contribution of the helix decreased with the increase in helix position-to-helix diameter ratio (dh/Dh). Moreover, when dh/Dh ≥ 1.5, both central shaft and helix behaved independently, and their contribution in mobilized shear strength cannot be considered as a group. Regarding the effect of the helix position on the shaft pressure, when dh/Dh < 1.5, the ratio of screw pile to straight pile end-bearing capacity decreases almost linearly with the increase in dh/Dh. A modified equation is proposed that includes the two factors—helix position and shape (helix which differentiates screw pile shape from the straight pile)—to estimate the end-bearing capacity of the strong helix screw pile.
    URI
    http://yetl.yabesh.ir/yetl1/handle/yetl/4286348
    Collections
    • International Journal of Geomechanics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV