Show simple item record

dc.contributor.authorElrentisy, Mohamed H.
dc.contributor.authorAbdellatif, Yasser M.
dc.contributor.authorElbashir, Aboubaker M.
dc.contributor.authorAhmed, Samer F.
dc.date.accessioned2022-05-08T09:38:53Z
dc.date.available2022-05-08T09:38:53Z
dc.date.copyright4/13/2022 12:00:00 AM
dc.date.issued2022
dc.identifier.issn0195-0738
dc.identifier.otherjert_144_7_072303.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4285403
dc.description.abstractExtreme weather conditions in the Gulf, Qatar, have been taken as an example in this study, tend to be hot and humid mostly throughout the year, especially in the summer. Such weather negatively affects the performance and emissions of all combustion engines, in particular diesel engines. In this work, a modified air-conditioning system was designed for controlling the inlet air temperature and humidity of a naturally aspirated single-cylinder diesel engine. The study investigated the effect of running the engine at different controlled inlet air temperatures on the engine performance and emission characteristics. It was found that running the diesel engine at 20 °C inlet air temperature compared with 45 °C, the average ambient air temperature during summer in Qatar could increase the in-cylinder peak pressure by 10%, and the volumetric efficiency of the engine by 8.5%. Moreover, the air-to-fuel (A/F) ratio has increased by 27.5% with 20 °C compared with 45 °C, while a minor effect was observed on the specific fuel consumption. For the emissions, there was a considerable reduction rate in NOx emissions with about 83% at 20 °C as well as a 50% reduction in hydrocarbon (HC) emissions compared with 45 °C. Furthermore, the smoke emission has decreased by 40% at the engine full load. It was also proved that using the air-conditioning system of a vehicle to cool the intake air temperature is visible, as the net gained the power of the engine has increased by 14.5% when running at 20 °C compared with 45 °C.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDevelopment of an Air-Cooled Induction Manifold for Diesel Engines in Hot and Humid Climate
dc.typeJournal Paper
dc.journal.volume144
dc.journal.issue7
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4054176
dc.journal.fristpage72303-1
dc.journal.lastpage72303-11
dc.page11
dc.treeJournal of Energy Resources Technology:;2022:;volume( 144 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record