Two-Dimensional Transient Heat Transfer Model for High-Temperature Laser-Scanning Confocal Microscopy

Abstract

High-temperature laser-scanning confocal microscopy (HT-LSCM) has proven to be an excellent experimental technique through in situ observations of high temperature phase transformation to study kinetics and morphology using thin disk steel specimens. A 1.0 kW halogen lamp within the elliptical cavity of the HT-LSCM furnace radiates heat and imposes a nonlinear temperature profile across the radius of the steel sample. When exposed at the solid/liquid interface, this local temperature profile determines the kinetics of solidification and phase transformation morphology. A two-dimensional numerical heat transfer model for both isothermal and transient conditions is developed for a concentrically solidifying sample. The model can accommodate solid/liquid interface velocity as an input parameter under concentric solidification with cooling rates up to 100 K/min. The model is validated against a commercial finite element analysis software package, strand7, and optimized with experimental data obtained under near-to equilibrium conditions. The validated model can then be used to define the temperature landscape under transient heat transfer conditions.