Show simple item record

dc.contributor.authorTao, Junyu
dc.contributor.authorLin, Zhe
dc.contributor.authorZhang, Guang
dc.contributor.authorSu, Jingpan
dc.contributor.authorZhu, Zuchao
dc.date.accessioned2022-05-08T09:10:01Z
dc.date.available2022-05-08T09:10:01Z
dc.date.copyright1/12/2022 12:00:00 AM
dc.date.issued2022
dc.identifier.issn0098-2202
dc.identifier.otherfe_144_05_051202.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4284804
dc.description.abstractThis research took the DN50 butterfly valve as the research object and studied the flow situation of butterfly valves with different shafts. The resistance characteristics, flow state, characteristics, and flow instability of butterfly valves with different structures were studied by experiments and numerical simulations. Research shows that the flow separation occurs at the edge of the valve disk, and the drag of the valve disk fluctuates nonperiodically with time. Under different opening degrees, the velocity distribution downstream of the valve varies, and the effect of the shaft on the velocity fluctuation is different. Finally, the unstable region of flow downstream of the valve is determined. This study provides a reference for the use and optimization of butterfly valves.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Numerical and Experimental Study of the Time-Averaged and Transient Flow Downstream of a Butterfly Valve
dc.typeJournal Paper
dc.journal.volume144
dc.journal.issue5
dc.journal.titleJournal of Fluids Engineering
dc.identifier.doi10.1115/1.4052632
dc.journal.fristpage51202-1
dc.journal.lastpage51202-9
dc.page9
dc.treeJournal of Fluids Engineering:;2022:;volume( 144 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record