Show simple item record

dc.contributor.authorYang, Zeyuan
dc.contributor.authorWu, Yadong
dc.contributor.authorOuyang, Hua
dc.date.accessioned2022-05-08T08:56:16Z
dc.date.available2022-05-08T08:56:16Z
dc.date.copyright2/24/2022 12:00:00 AM
dc.date.issued2022
dc.identifier.issn0889-504X
dc.identifier.otherturbo_144_6_061010.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4284530
dc.description.abstractRotating instability (RI) and rotating stall (RS) are two types of aerodynamic instability in axial compressors. The former features the side-by-side peaks below the blade passing frequency (BPF) in frequency spectra, and the latter represents one or more stall cells rotating in the compressor. This article presents an experiment on the nearfield pressure and farfield acoustic characteristics of RI phenomenon in a low-pressure axial compressor rotor, which endures both RI and RS at several working conditions. To obtain the high-order modes of RI and other aerodynamic instability, a total of 9 or 20 Kulites are circumferentially mounted on the casing wall to measure the nearfield pressure fluctuation using a mode order calibration method. Meantime in the farfield 16 microphones are planted to measure the acoustic mode order using the compressive sensing method. Through calibration, the experiments acquire the mode orders generated by RI and the interaction between RI and BPF, which are higher than the number of transducers. As for RS, the mode decomposition shows a mode order of 1, indicating one single stall cell rotating in the compressor. This experiment also shows that the amplitudes of RI modes are decreased when RS occurs, but both RS modes and RI modes will be enhanced if the flowrate is further reduced. This experiment reveals that RI experiences three stages of “strengthen-weaken-strengthen,” and hence, RI may not be regarded only as “prestall” disturbance.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInvestigation on Mode Characteristics of Rotating Instability and Rotating Stall in an Axial Compressor
dc.typeJournal Paper
dc.journal.volume144
dc.journal.issue6
dc.journal.titleJournal of Turbomachinery
dc.identifier.doi10.1115/1.4053238
dc.journal.fristpage61010-1
dc.journal.lastpage61010-9
dc.page9
dc.treeJournal of Turbomachinery:;2022:;volume( 144 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record