Show simple item record

dc.contributor.authorPengcheng Li
dc.contributor.authorDavid Z. Zhu
dc.contributor.authorTingyu Xu
dc.contributor.authorJian Zhang
dc.date.accessioned2022-05-07T21:24:19Z
dc.date.available2022-05-07T21:24:19Z
dc.date.issued2021-12-07
dc.identifier.other(ASCE)HY.1943-7900.0001963.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4283687
dc.description.abstractUnderstanding the air demand of a hydraulic jump in a closed conduit is important in hydropower operations and urban sewer designs. In this study, physical experiments are described to study flow regimes and the air demand of a hydraulic jump in a closed conduit with various submerged outlet depths. Flow regimes with a submerged outlet were defined following previous studies based on outlet depth. Free-surface supercritical flow with a hydraulic jump can induce a relative air demand (air flow rate to water flow rate) of approximately 3%–14%. If the hydraulic jump is followed by pressurized pipe flow, the air demand decreases with increasing outlet depth until the return roller is fully developed in the pipe. For the partially submerged hydraulic jump, the relative air demand is significantly reduced to less than 1%. Field measurements of the air demand at the Hugh Keenleyside Dam, British Columbia, were consistent with the experimental measurements for the partially submerged hydraulic jump. The dynamics of the air pocket upstream of the hydraulic jump was studied. If the air supply was constrained by nozzles of various sizes placed on the top of the air vent, the air pressure in the closed conduit decreased and the hydraulic jump was pushed upstream. The energy loss coefficient in the air vent was also studied.
dc.publisherASCE
dc.titleAir Demand of a Hydraulic Jump in a Closed Conduit
dc.typeJournal Paper
dc.journal.volume148
dc.journal.issue2
dc.journal.titleJournal of Hydraulic Engineering
dc.identifier.doi10.1061/(ASCE)HY.1943-7900.0001963
dc.journal.fristpage04021058
dc.journal.lastpage04021058-12
dc.page12
dc.treeJournal of Hydraulic Engineering:;2021:;Volume ( 148 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record