Show simple item record

dc.contributor.authorDaoyong Wu
dc.contributor.authorFan Chen
dc.contributor.authorLin Tang
dc.contributor.authorHong Wei
dc.date.accessioned2022-05-07T21:16:49Z
dc.date.available2022-05-07T21:16:49Z
dc.date.issued2022-7-1
dc.identifier.other(ASCE)GM.1943-5622.0002410.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4283534
dc.description.abstractWeak interlayers determine the strength and stability of a jointed rock mass. The influence of weak interlayer filling state on the shear strength and failure patterns of a rock mass was studied by direct shear testing. Two different shear failure patterns of infilled joints were discovered, depending on the filling conditions of the weak interlayer. Shear failure occurred within the weak interlayer for large filling thickness, while the coupling effects of occlusal failure of asperities and shear failure of weak interlayer occurred for thin filling thickness. The shear strength of the infilled rock mass depended on the shear strength of weak interlayers and the occlusal strength of asperities on the rough joints. Moreover, the shear strength of a weak interlayer was entirely utilized in the first stage of shearing, and the occlusal strength of asperities then became much important with increasing shear deformation. The Mohr–Coulomb criterion was adopted to study the relationship between the peak stress and the normal stress in the first and third stages of shear stress evolution, which confirmed that the apparent cohesion and internal friction angle severally controlled the shear strength of the rock mass under low and high normal stresses. Finally, the impact of filling thickness on the shear strength of a jointed rock mass was predicted, according to the variations of apparent cohesion and internal friction angles. Observable shear displacement, accompanied by the secondary growth of shear stress, may be generated in an infilled rock mass before catastrophic failure. The results were of great significance for understanding the influence of the weak interlayer filling state on the shear strength and failure patterns of a jointed rock mass. Monitoring the stress and deformation of the infilled rock mass could provide useful information for the prediction of engineering disasters in rock, allowing effective control measures to be taken before hazards occur.
dc.publisherASCE
dc.titleInfluence of Weak Interlayer Filling State on the Failure Patterns of Natural Rock Joints
dc.typeJournal Paper
dc.journal.volume22
dc.journal.issue7
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0002410
dc.journal.fristpage04022086
dc.journal.lastpage04022086-9
dc.page9
dc.treeInternational Journal of Geomechanics:;2022:;Volume ( 022 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record