Show simple item record

dc.contributor.authorPriyanka Bhartiya
dc.contributor.authorDipanjan Basu
dc.contributor.authorTanusree Chakraborty
dc.date.accessioned2022-05-07T21:15:42Z
dc.date.available2022-05-07T21:15:42Z
dc.date.issued2022-6-1
dc.identifier.other(ASCE)GM.1943-5622.0002375.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4283511
dc.description.abstractPiled raft foundations (PRFs) below stepped high-rise towers are often subjected to nonuniform triangular-shaped loads with eccentricities. In this study, 20 rectangular piled rafts with different pile configurations and orientations, embedded in medium-dense sandy soil, are analyzed using three-dimensional nonlinear finite-element (FE) analysis in which the critical state–based Clay and Sand Model (CASM) is used as the soil constitutive model. Different triangularly distributed loads with and without eccentricities are considered in addition to uniformly distributed loads. A systematic parametric study is performed by varying the different design parameters based on which the PRF behavior is systematically investigated in terms of multiple performance parameters such as maximum settlement, differential settlement, angular distortion, tilt, and load distribution between the raft and the piles and between the individual piles. It is observed that the pile diameter, number of piles, and raft plan area control the differential settlement, angular distortion, and tilt the most. Based on the insights gained from the parametric study, a design optimization exercise is performed, in which the most optimal pile configuration is selected based on the criteria of allowable settlement and angular distortion with additional considerations for tilt, load distribution, and the volume of concrete required.
dc.publisherASCE
dc.titleEffect of Design Parameters on Piled Rafts in Sand under Eccentric Triangular Loads
dc.typeJournal Paper
dc.journal.volume22
dc.journal.issue6
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0002375
dc.journal.fristpage04022060
dc.journal.lastpage04022060-20
dc.page20
dc.treeInternational Journal of Geomechanics:;2022:;Volume ( 022 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record