Show simple item record

dc.contributor.authorYaohui Du
dc.contributor.authorHan Bao
dc.contributor.authorPeijie Yin
dc.contributor.authorChangqing Liu
dc.contributor.authorZhi He
dc.contributor.authorXunhui Xu
dc.date.accessioned2022-05-07T21:15:41Z
dc.date.available2022-05-07T21:15:41Z
dc.date.issued2022-6-1
dc.identifier.other(ASCE)GM.1943-5622.0002374.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4283510
dc.description.abstractThe anisotropic shear strength of rough joints is examined from both experiments and numerical simulations in this paper. The rough joints in the experiment are prepared by combining 3D laser scanning and 3D printing technology. The direct shear tests are conducted in eight shear directions under constant normal load condition (CNL) with the normal stress of 0.2, 0.5, and 1.0 MPa. The dramatic variation of shear strength in different shear directions is observed from experimental results. Meanwhile, the numerical simulation based on the three-dimensional discrete-element method (DEM) is conducted, in which, the method to generate the identical rough joint by connecting triangular walls is proposed. With the calibrated microparameters from the unconfined compression test and direct shear test, the anisotropic shear strength is also observed in the numerical simulation, which is consistent with the experimental result. Accordingly, the topography anisotropy of the rough surface is analyzed, and the statistical parameter, Z2θ, is found closely related to the anisotropic shear strength of rough joints. Based on this, the Barton model is modified to estimate the shear strength of artificial joints with an anisotropic effect involved.
dc.publisherASCE
dc.titleStudy on the Anisotropic Shear Strength of Rough Joint via 3D Scanning, 3D Printing, and 3D Discrete-Element Modeling
dc.typeJournal Paper
dc.journal.volume22
dc.journal.issue6
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0002374
dc.journal.fristpage04022058
dc.journal.lastpage04022058-10
dc.page10
dc.treeInternational Journal of Geomechanics:;2022:;Volume ( 022 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record