Show simple item record

dc.contributor.authorFrancisco Manuel Garcia Rodriguez
dc.contributor.authorLars Bo Ibsen
dc.contributor.authorAleksandra Katarzyna Koteras
dc.contributor.authorAmin Barari
dc.date.accessioned2022-05-07T21:15:32Z
dc.date.available2022-05-07T21:15:32Z
dc.date.issued2022-6-1
dc.identifier.other(ASCE)GM.1943-5622.0002370.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4283506
dc.description.abstractThe current practice for estimating the penetration resistance of suction bucket foundations requires breaking down the penetration resistance into tip and skirt resistance components. Cone penetration test (CPT)-based methodology correlates these components to the cone resistance measurements through empirical coefficients. In this study, an experimental campaign involving suction installation, jacking, and pullout tests on suction buckets with a large aspect ratio (i.e., L/D = 1, where L is the skirt length and D is the diameter) atop sand deposits of varying relative densities was performed to identify the important factors that are involved in the installation procedure but are not well understood. The following factors were studied: the influence of the friction area in caissons of round and modular shapes, the dilative behavior of sand, the soil–structure interface friction angle, and the penetration depth. The experimental results of the jacking installation tests indicated that a larger friction area significantly increased the penetration resistance; however, this effect was completely diminished when foundation suction-assisted penetration was used. Based on these results, modified friction resistance and tip resistance factors in the empirical expressions accounting for the relative density and penetration depth were proposed. Finally, the required suction pressure was back-analyzed by utilizing these empirical relations, reduction factors, and the critical pressure.
dc.publisherASCE
dc.titleInvestigation of the Penetration Resistance Coefficients for the CPT-Based Method for Suction Bucket Foundation Installation in Sand
dc.typeJournal Paper
dc.journal.volume22
dc.journal.issue6
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0002370
dc.journal.fristpage04022063
dc.journal.lastpage04022063-12
dc.page12
dc.treeInternational Journal of Geomechanics:;2022:;Volume ( 022 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record