Show simple item record

dc.contributor.authorChristian Geindreau
dc.contributor.authorFabrice Emeriault
dc.contributor.authorAbdelali Dadda
dc.contributor.authorOlatounde Yaba
dc.contributor.authorLorenzo Spadini
dc.contributor.authorAnnette Esnault Filet
dc.contributor.authorAurélie Garandet
dc.date.accessioned2022-05-07T21:11:57Z
dc.date.available2022-05-07T21:11:57Z
dc.date.issued2022-3-1
dc.identifier.other(ASCE)GM.1943-5622.0002302.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4283432
dc.description.abstractAn experimental study was performed to investigate the effects of an acid solution on the mechanical strength and the microstructure of biocemented sand. The tests were performed on small triaxial samples extracted from a large-scale model. An acid solution composed of hydrochloric acid and Tris buffer with an initial pH of 6.6 was injected in the triaxial apparatus in different amounts. The changes of the physical and mechanical properties of the sample were studied afterwards. Triaxial drained tests with constant confining pressures were performed on the chemically treated samples in order to determine the remaining strength of the samples. Moreover, several scanning electron microscope (SEM) and X-ray microtomography observations were performed on small subsamples in order to identify the changes in the microstructure due to the chemical dissolution. The experimental results point out that the strength of the treated specimens decreases dramatically compared with that of the initial untreated specimens. Typically, a 50% strength reduction has been found for 10% of total calcite dissolution. Furthermore, the microstructural observations have shown uniform calcite dissolution at the pore scale (no preferential locations). The calcite crystal structures were damaged randomly by the chemical solution. A reduction of the spatial densities and sizes of these crystals were found from SEM and X-ray microtomography observations. Overall, no hysteretic effects were observed on the mechanical (strength) and microstructural (contact surface area) properties between the biocementation and dissolution paths.
dc.publisherASCE
dc.titleMechanical and Microstructural Changes of Biocemented Sand Subjected to an Acid Solution
dc.typeJournal Paper
dc.journal.volume22
dc.journal.issue3
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0002302
dc.journal.fristpage04021307
dc.journal.lastpage04021307-14
dc.page14
dc.treeInternational Journal of Geomechanics:;2022:;Volume ( 022 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record