Show simple item record

dc.contributor.authorXiao Ding Bu
dc.contributor.authorJeffrey A. Packer
dc.date.accessioned2022-05-07T20:28:33Z
dc.date.available2022-05-07T20:28:33Z
dc.date.issued2022-03-30
dc.identifier.other(ASCE)ST.1943-541X.0003343.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4282480
dc.description.abstractThe design of a rectangular hollow-section K-connection in which the branches are welded toe-to-toe to the chord is not permitted at present in design guides and codes. To illustrate the feasibility of such connections, two full-scale cold-formed welded rectangular hollow-section K-connection laboratory tests, including one control specimen and one zero-gap specimen, are presented. A new chord face shear analytical model based on a yield-line mechanism is proposed for such connections, and its validity was evaluated against the experiments. Nonlinear finite-element connection models were built and validated against the laboratory tests, and a numerical parametric study was performed on similar connections with a broader range of parameters. From the results of the finite-element study, an empirical connection strength model was also generated by regression curve-fitting. Based on the experimental and numerical data, the proposed chord face shear analytical model is recommended for design of rectangular hollow-section zero-gap K-connections. The gap size can also be increased up to the summation of the two branch thicknesses.
dc.publisherASCE
dc.titleRHS-to-RHS Zero-Gap K-Connections
dc.typeJournal Paper
dc.journal.volume148
dc.journal.issue6
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0003343
dc.journal.fristpage04022055
dc.journal.lastpage04022055-18
dc.page18
dc.treeJournal of Structural Engineering:;2022:;Volume ( 148 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record