Show simple item record

dc.contributor.authorYukai Zhong
dc.contributor.authorYao Sun
dc.contributor.authorOu Zhao
dc.contributor.authorLeroy Gardner
dc.date.accessioned2022-05-07T20:28:30Z
dc.date.available2022-05-07T20:28:30Z
dc.date.issued2022-03-22
dc.identifier.other(ASCE)ST.1943-541X.0003341.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4282478
dc.description.abstractThe structural behavior and residual capacity of S700 high-strength steel circular hollow section (CHS) columns after exposure to elevated temperatures were studied through testing and numerical modeling. The testing program was conducted on 10 S700 high-strength steel CHS columns and comprised heating and cooling of the specimens as well as postfire material testing, measurements of initial geometric imperfections, and pin-ended column tests. Numerical simulations were subsequently performed, where finite element models were built and validated with reference to the experimental results and afterward used to conduct parametric studies to obtain further numerical data. Given that there are no specific provisions for the design of steel structures after exposure to elevated temperatures, the relevant room-temperature design buckling curves were evaluated, using postfire material properties, for their applicability to S700 high-strength steel CHS columns after exposure to elevated temperatures, based on the experimental and numerical data. The evaluation results indicated that the buckling curves prescribed in the American specification and Australian standard lead to accurate and consistent residual capacity predictions for S700 high-strength steel CHS columns after exposure to elevated temperatures, while the Eurocode buckling curve yields conservative predictions of residual capacity. A revised Eurocode buckling curve was then proposed, and resulted in a higher level of accuracy than its original counterpart.
dc.publisherASCE
dc.titleStructural Response and Residual Capacity of S700 High-Strength Steel CHS Columns after Exposure to Elevated Temperatures
dc.typeJournal Paper
dc.journal.volume148
dc.journal.issue6
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0003341
dc.journal.fristpage04022050
dc.journal.lastpage04022050-12
dc.page12
dc.treeJournal of Structural Engineering:;2022:;Volume ( 148 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record