Show simple item record

dc.contributor.authorMatthew D. Joyner
dc.contributor.authorBella Puentes
dc.contributor.authorCasey Gardner
dc.contributor.authorStevie Steinberg
dc.contributor.authorMehrdad Sasani
dc.date.accessioned2022-05-07T20:26:06Z
dc.date.available2022-05-07T20:26:06Z
dc.date.issued2022-01-17
dc.identifier.other(ASCE)ST.1943-541X.0003286.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4282421
dc.description.abstractWhen facing multiple, competing, objectives such as those encountered in resilience-based design of buildings (e.g., cost reduction versus functionality preservation), there is no single design that can be declared objectively better than the rest. Multiobjective optimization (MOO) methods can instead be used to identify a group of design alternatives that represent the optimal trade-offs between competing objectives. In doing so, however, MOO relies on performance evaluation for a large number of design alternatives, representing a problem for performance-based building seismic design, which typically involves computationally intensive and time-consuming nonlinear analyses of building models subjected to suites of ground motion records. Furthermore, only minimal guidance exists for the post-MOO selection of a final design from the optimal set, further impeding its adoption in design of buildings. This paper addresses these issues through use of simplified structural models and methods applied within a MOO methodology, coupled with a newly adapted post-Pareto pruning approach to narrow down the optimal design set to a manageable-sized group of final design alternatives. The methodology was applied to optimize the design of a 7-story reinforced concrete moment frame office building in San Francisco.
dc.publisherASCE
dc.titleMultiobjective Optimization of Building Seismic Design for Resilience
dc.typeJournal Paper
dc.journal.volume148
dc.journal.issue4
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0003286
dc.journal.fristpage04022006
dc.journal.lastpage04022006-13
dc.page13
dc.treeJournal of Structural Engineering:;2022:;Volume ( 148 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record