Reinforced Concrete Beams Strengthened in Flexure with Near-Surface Mounted 7075 Aluminum Alloy Bars
View/ Open
Date
2021-10-25Author
Guo-Hua Xing
Xu Chen
Jiao Huang
Yu Zhang
Osman E. Ozbulut
Zhao-Qun Chang
Metadata
Show full item recordAbstract
The flexural behavior of reinforced concrete (RC) beams strengthened with near-surface mounted (NSM) 7075 aluminum alloy (AA) bars was investigated through experimental testing. In particular, 10 RC beams strengthened with NSM AA bars and one control beam were tested under four-point bending loading. The experimental variables included NSM reinforcement ratio, bonded length of NSM reinforcement, end anchoring of NSM reinforcement, and type of bonding agent. The test results were evaluated in terms of the load-deflection curves, failure modes, ductility, and strains in NSM reinforcements, and the effects of different test parameters on the effectiveness of the proposed strengthening approach were discussed. In addition, analytical models were developed to predict the load-bearing capacities of strengthened beams failed by intermediate crack debonding and concrete cover separation, respectively. The RC beams strengthened with NSM AA bars exhibited a significant improvement in maximum load ranging from 35% to 120% over the reference specimen.