Show simple item record

dc.contributor.authorXin Wang
dc.contributor.authorShui Liu
dc.contributor.authorYuwei Shi
dc.contributor.authorZhishen Wu
dc.contributor.authorWeidong He
dc.date.accessioned2022-05-07T20:22:37Z
dc.date.available2022-05-07T20:22:37Z
dc.date.issued2021-10-21
dc.identifier.other(ASCE)ST.1943-541X.0003207.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4282343
dc.description.abstractThe flexural behavior of concrete beams reinforced with a combination of basalt fiber–reinforced polymer (BFRP) bars and steel bars is investigated herein. Five hybrid BFRP and steel bar RC beams, one pure BFRP-RC beam, and one pure steel-RC beam, were designed based on the principle of equal stiffness and subject to four-point bending tests. The main study parameters included the bar type, ratio of the steel reinforcement area to the BFRP reinforcement area (As/Af), and BFRP bar diameter. The results of the four-point bending tests showed that the hybrid-RC beams had a lower ultimate load and larger ultimate deflection with the increase in As/Af. The tested beams had similar stiffnesses before yielding; the five hybrid-RC beams exhibited an obvious postyielding stiffness as well, which contributes to a higher reserve in both strength and deformability. Comparisons between the experimental values and predicted values of ultimate capacity, deflection, and crack width using design models are also presented herein.
dc.publisherASCE
dc.titleIntegrated High-Performance Concrete Beams Reinforced with Hybrid BFRP and Steel Bars
dc.typeJournal Paper
dc.journal.volume148
dc.journal.issue1
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0003207
dc.journal.fristpage04021235
dc.journal.lastpage04021235-12
dc.page12
dc.treeJournal of Structural Engineering:;2021:;Volume ( 148 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record