Show simple item record

dc.contributor.authorJingjie Yang
dc.contributor.authorLei Xu
dc.contributor.authorYu Shi
dc.contributor.authorWeiyong Wang
dc.date.accessioned2022-05-07T20:22:09Z
dc.date.available2022-05-07T20:22:09Z
dc.date.issued2021-10-19
dc.identifier.other(ASCE)ST.1943-541X.0003193.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4282333
dc.description.abstractTo better understand the mechanical behavior of cold-formed steel (CFS) quadruple-limb built-up box-section (QBB) columns associated with flexural buckling, 12 axial compression tests with different slenderness ratios and screw spacing were conducted. The test results showed that, for a slender specimen (L=2,700 and 3,300 mm), when the screw spacing was reduced from 600 to 300 mm, the load-bearing capacity increased by about 6%–10%. When the screw spacing was reduced from 600 to 150 mm, the load-bearing capacity increased by about 14.6%–17.5%. Arranging end fastener groups can enhance the strength of the column, but it may be cumbersome and uneconomical. A finite-element model (FEM) was developed and calibrated against the test results. A series of parametric analyses was carried out to investigate the effects of the screw spacing and shear stiffness on the elastic buckling load and ultimate load-bearing capacity. Finally, a practical design method was proposed to evaluate the column’s elastic buckling load and load-bearing capacity associated with flexural buckling. Compared with the simulation and test results, the proposed design method was accurate at predicting the load-bearing capacity of the specimens, with a relative difference of less than 6%.
dc.publisherASCE
dc.titleExperimental and Analytical Study of Flexural Buckling of Cold-Formed Steel Quadruple-Limb Built-Up Box Columns
dc.typeJournal Paper
dc.journal.volume148
dc.journal.issue1
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0003193
dc.journal.fristpage04021228
dc.journal.lastpage04021228-16
dc.page16
dc.treeJournal of Structural Engineering:;2021:;Volume ( 148 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record