Show simple item record

dc.contributor.authorYing Wang
dc.contributor.authorHang Lin
dc.contributor.authorZhichao Lai
dc.contributor.authorDong Li
dc.contributor.authorWeisheng Zhou
dc.contributor.authorXiaoqiang Yang
dc.date.accessioned2022-05-07T20:22:04Z
dc.date.available2022-05-07T20:22:04Z
dc.date.issued2021-10-20
dc.identifier.other(ASCE)ST.1943-541X.0003192.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4282332
dc.description.abstractThis study experimentally and numerically investigates the flexural behavior of high-strength rectangular concrete-filled steel tube (CFST) members. An experimental database including 30 flexural tests on high-strength rectangular CFST members was compiled, and gaps in the existing research were identified. To address these gaps, a total of 14 specimens were tested, considering the effect of tube thickness, compressive strength of concrete, yield stress of steel, and tube height. Detailed finite-element models were also developed and benchmarked for parametric studies. Results from the tests and finite-element analyses indicated the following: (1) the flexural strength increased with the increasing tube thickness, yield stress of steel, tube height, and tube width, while the effect of the compressive strength of concrete was minor; (2) the flexural stiffness increased with the increasing tube thickness, tube height, and tube width, while the effect of the yield stress of steel and compressive strength of concrete was minor; and (3) high-strength CFST members, especially those with high-strength steel tubes, had lower ductility compared with conventional-strength CFST members. Experimental and numerical results were also used to evaluate the applicability of current design provisions (i.e., AISC 360-16, GB 50936-2014, Eurocode 4, and the AIJ) for estimating the flexural strength and stiffness. The evaluation showed that AISC 360-16 reasonably estimated the flexural strength, while AIJ provided the most accurate estimation of the service-level flexural stiffness.
dc.publisherASCE
dc.titleFlexural Behavior of High-Strength Rectangular Concrete-Filled Steel Tube Members
dc.typeJournal Paper
dc.journal.volume148
dc.journal.issue1
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0003192
dc.journal.fristpage04021230
dc.journal.lastpage04021230-15
dc.page15
dc.treeJournal of Structural Engineering:;2021:;Volume ( 148 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record