Show simple item record

dc.contributor.authorYin, Yanshan
dc.contributor.authorYang, Boming
dc.contributor.authorYin, Jie
dc.contributor.authorTian, Hong
dc.contributor.authorZhang, Wei
dc.contributor.authorCheng, Shan
dc.contributor.authorHu, Zhangmao
dc.contributor.authorXu, Huifang
dc.date.accessioned2022-02-04T22:54:19Z
dc.date.available2022-02-04T22:54:19Z
dc.date.copyright4/1/2020 12:00:00 AM
dc.date.issued2020
dc.identifier.issn0195-0738
dc.identifier.otherjert_142_4_042301.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4275674
dc.description.abstractThe combustion kinetics of corn stalk (CS), paper sludge (PS), and their mixture were studied by thermogravimetric analysis (TGA) using one model-fitting method (Coats–Redfern (CR)) and four model-free methods, namely, Flynn–Wall–Ozawa (FWO), Kissinger–Akahira–Sunose (KAS), Starink, and Friedman methods. TGA experiments were carried out at three different heating rates (10, 20, and 30 °C min−1) and with different weight percentages of PS in the mixture (0%, 20%, 50%, 80%, and 100%). The comprehensive combustion characteristic index decreases with an increase in the weight percentage of PS in the blends and increases with the increasing heating rate. Significant interactions occur in the co-firing of the blends containing 20% and 50% of PS. The co-firing kinetic parameters determined by the CR method show relatively high reliability due to the high correlation coefficient obtained from the linear fitting. The values of average activation energy determined by the model-fitting method are generally lower than those calculated from model-free methods. The co-firing of the blends containing 20% of PS shows the highest comprehensive combustion characteristic index and the lowest average activation energy based on the model-free methods.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleKinetic Analysis of Co-Firing of Corn Stalk and Paper Sludge Using Model-Fitting and Model-Free Methods
dc.typeJournal Paper
dc.journal.volume142
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4045316
dc.journal.fristpage042301-1
dc.journal.lastpage042301-8
dc.page8
dc.treeJournal of Energy Resources Technology:;2020:;volume( 142 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record