| dc.description.abstract | Inservice inspection rules for liquid-metal cooled plants were historically provided by Section XI, Division 3 of the ASME Boiler and Pressure Vessel Code. However, some parts of the Code, such as acceptance standards for the examination of class 1 and 2 components remained as being in the course of preparation. Although no major revisions were made to Division 3 since the first issue in 1980, a newly developed and published Code Case N-875 now provides alternative examinations to the methods previously contained in Division 3. The Code Case was developed using the System Based Code (SBC) concept pursuing rationalization of codes and standards based on reliability targets throughout a plant's service life. In this paper, an overview of the Code Case is presented. The technical foundation to establish the applicability of these alternative examinations as delineated in the Code Case consists of stage I and II evaluations with compensating individual considerations. Stage I is a structural integrity evaluation without the contribution of inservice inspections, while stage II is evaluation of the detectability of a postulated flaw. Not only conventional direct detection methods, but also indirect detection methods are permitted to be employed through the stage II evaluation. Furthermore, the detailed evaluation procedures are illustrated through the application of the Code Case's evaluation criteria to the primary heat transport piping system of a prototype sodium-cooled fast breeder reactor in Japan, specifically Monju. | |
