Criticality Characteristics and Sensitivity Analysis of Fukushima Debris Beds Containing MCCI Products

Abstract

This study investigates the criticality characteristics of debris beds that may have been formed through the molten–core–concrete-interaction (MCCI) at the pedestal floor of the damaged reactors in Fukushima Daiichi Nuclear Power Station. These were modeled as UO2-concrete systems submerged in water. First, a conservative model was used to evaluate the impact that the presence of concrete has on the neutron multiplication factor (keff) of debris beds. The good moderation capacities of concrete were proved, and it was found that recriticality would be possible under the considered conservative assumptions. Second, a more realistic model was used to perform an uncertainty and sensitivity analysis of a wide range of debris parameters (debris porosity, core meltdown grade, debris size, debris composition, concrete erosion factor, etc.). In this case, the results indicate that the probability of a recriticality event is very remote. It was also found that the presence of boron (B4C) from the control rods within debris has by far the highest influence on keff.