Influence of Pump Rotation Speed on Hydrodynamic Performance and Stator Blade Surface Pressure Pulsation in Torque Converter

Abstract

An experimental investigation was performed to characterize the influence of pump rotation speed on the hydrodynamic performance and the associated unsteady pressure on the stator blade pressure-surface in a torque converter. High-resolution miniature transducers were used to obtain the signature of the pressure pulsation at specific surface locations. Results show that the increase of the pump rotation speed can enhance the torque capacity of the stator, leading to a higher torque ratio in the low speed ratio range and an improvement of the highest transmission efficiency. The efficiency increase rate starts to reduce at approximately SR = 0.4, corresponding to where the stator capacity reaches the maximum and exhibits a uniform distribution of the pressure pulsation intensity. The spectral decomposition of the pulsating pressure reveals the existence of two dominating frequencies, which corresponds to the upstream pump turbine interaction and the downstream pump blade passing. Higher pump speeds enhance the pump turbine interaction and results in a more regular pressure pulsation, improving the hydrodynamic performance of the torque converter.