Show simple item record

dc.contributor.authorDong, Mingda
dc.contributor.authorShi, Xuedong
dc.contributor.authorbai, Jie
dc.contributor.authorYang, Zhilong
dc.contributor.authorQi, Zhilin
dc.date.accessioned2022-02-04T14:22:30Z
dc.date.available2022-02-04T14:22:30Z
dc.date.copyright2020/04/08/
dc.date.issued2020
dc.identifier.issn0195-0738
dc.identifier.otherjert_142_9_093002.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4273532
dc.description.abstractStress sensitivity phenomenon is an important property in low-permeability and tight reservoirs and has a large impact on the productivity of production wells, which is defined as the effect of effective stress on the reservoir parameters such as permeability, threshold pressure gradient, and rock compressibility change accordingly. Most of the previous works are focused on the effect of effective stress on permeability and threshold pressure gradient, while rock compressibility is critical of stress sensitivity but rarely noticed. A series of rock compressibility measurement experiments have been conducted, and the quantitative relationship between effective stress and rock compressibility is accurately described in this paper. In the experiment, the defects in previous experiments were eliminated by using a new-type core holder. The results show that as the effective stress increases, the rock compressibility becomes lower. Then, a stress sensitivity model that considers the effect of effective stress on rock compressibility is established due to the experimental results. The well performance of a vertical well estimated by this model shows when considering the effect of effective stress on the rock compressibility, the production rate and recovery factor are larger than those without considering it. Moreover, the effect of porosity and confining pressure on the productivity of a vertical well is also studied and discussed in this paper. The results show that the productivity of a vertical well decreases with the increase in overburden pressure, and increases with the increase in the porosity.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Novel Model for Well Production Performance Estimate in Low-Permeability and Tight Reservoirs Considering Stress Sensitivity
dc.typeJournal Paper
dc.journal.volume142
dc.journal.issue9
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4046701
dc.page93002
dc.treeJournal of Energy Resources Technology:;2020:;volume( 142 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record