Show simple item record

dc.contributor.authorShi, Xiangchao
dc.contributor.authorZhuo, Xiao
dc.contributor.authorXiao, Yue
dc.contributor.authorGuo, Boyun
dc.contributor.authorZhu, Cheng
dc.contributor.authorLi, Jiaxue
dc.date.accessioned2022-02-04T14:14:23Z
dc.date.available2022-02-04T14:14:23Z
dc.date.copyright2020/01/07/
dc.date.issued2020
dc.identifier.issn0195-0738
dc.identifier.otherjert_142_6_063003.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4273250
dc.description.abstractWellbore instability is a critical issue restricting efficient well drilling and successful development of oil and gas field. Most instability problems originate from shale formations because of their distinct laminated structures that cause significant anisotropy and moderate to high clay contents that are prone to shrinkage and swelling. To account for these influences on the mechanical responses of shales, this study aims to identify an appropriate strength criterion for stability analyses. Two anisotropic criteria including single plane of weakness and the modified Hoek–Brown criteria were compared to evaluate their suitability in characterizing the anisotropic strength of layered rocks including shale, schist, and slate under different confining pressures. Comparative case studies indicated that the single plane of weakness criterion overestimates the strength of layered rocks at some orientation angles. The modified Hoek–Brown criterion can fit well with the experimental data of layered rocks. Moreover, wellbore stability analysis models for shale gas wells were built, respectively, for each criterion and applied to in situ scenarios. The single plane of weakness and modified Hoek–Brown criteria provide similar results of collapse pressure, and the shale failure is mainly determined by the bedding plane. This further validates that the modified Hoek–Brown criterion is a good choice for wellbore stability analysis in shale formations with bedding planes. This study shows the potential of using the modified Hoek–Brown criterion to enhance the safety and efficiency of well drilling and operation in shale formations.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleWellbore Stability in Layered Rocks: A Comparative Study of Strength Criteria
dc.typeJournal Paper
dc.journal.volume142
dc.journal.issue6
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4045735
dc.page63003
dc.treeJournal of Energy Resources Technology:;2020:;volume( 142 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record