Show simple item record

dc.contributor.authorChao Dou
dc.contributor.authorXie Cheng
dc.contributor.authorYuan-Yuan Zhao
dc.contributor.authorNa Yang
dc.date.accessioned2022-02-01T22:11:34Z
dc.date.available2022-02-01T22:11:34Z
dc.date.issued11/1/2021
dc.identifier.other%28ASCE%29ST.1943-541X.0003162.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4272801
dc.description.abstractSteel corrugated shear walls (SCSWs) are an alternative to ordinary steel plate shear walls (SPSWs) with flat infill plates. This paper deals with the shear resistance design of corrugated panels in SCSWs under monotonic loading. Based on the validated finite-element analysis (FEA), key parameters affecting the ultimate and postultimate strengths of corrugated shear panels were identified and the proper values were recommended. By introducing the normalized slenderness ratio, design formulas were established for the ultimate strength and residual strength of corrugated panels. Recommended corrugation profiles were tabulated for convenience of practical use to ensure high and stable shear resistance. It was found that, compared with the ultimate strength, variation of the residual strength against the normalized slenderness ratio is much more complicated, and the corrugation dimensions must be chosen properly according to the proposed design equations and recommendations to avoid unstable postbuckling behavior.
dc.publisherASCE
dc.titleShear Resistance and Design of Infill Panels in Corrugated-Plate Shear Walls
dc.typeJournal Paper
dc.journal.volume147
dc.journal.issue11
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0003162
dc.journal.fristpage04021179-1
dc.journal.lastpage04021179-13
dc.page13
dc.treeJournal of Structural Engineering:;2021:;Volume ( 147 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record