Show simple item record

dc.contributor.authorBigul Pokharel
dc.contributor.authorSumi Siddiqua
dc.date.accessioned2022-02-01T21:53:59Z
dc.date.available2022-02-01T21:53:59Z
dc.date.issued11/1/2021
dc.identifier.other%28ASCE%29GM.1943-5622.0002172.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4272250
dc.description.abstractA lower shear strength and higher compressibility impose major challenges for construction on organic soils. Cementitious materials have been effectively used in the improvement of the engineering properties of mineral soils with low organic contents. However, limited studies have been devoted to the stabilization of the organic soils commonly encountered in forested regions in Canada. The present study investigated the effects of pulp mill fly ash (PFA) on the compressibility of a natural soil consisting of 26% organic matter. Fall-cone and oedometer tests were conducted on organic soil mixed with different PFA dosages (5%, 10%, 20%, 30%, 40%, and 50%), as well as on untreated soil samples. The mineralogical and microstructural aspects of PFA-treated organic soil were examined using scanning electron microscope and energy-dispersive X-ray spectroscopy techniques. The results suggest that when the organic soil was treated with PFA, its undrained shear strength and compressibility behavior were improved. Moreover, the potentially large settlement of organic soil can be reduced by the addition of PFA. The primary and secondary compression index (Cc and Cα, respectively) values decreased significantly when compared with the untreated organic soil, indicating that PFA stabilizers can effectively improve the creep behavior of organic soils. These findings indicate that the beneficial utilization of PFA for the stabilization of organic soils could be a practical step toward the environmentally sound management of this waste byproduct.
dc.publisherASCE
dc.titleUnderstanding the Effect of Pulp Mill Fly Ash on Strength, Compressibility, and Microstructure of Organic Soil
dc.typeJournal Paper
dc.journal.volume21
dc.journal.issue11
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0002172
dc.journal.fristpage04021209-1
dc.journal.lastpage04021209-12
dc.page12
dc.treeInternational Journal of Geomechanics:;2021:;Volume ( 021 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record