| dc.description.abstract | Calcination conditions in the catalyst preparation process have a significant influence on catalyst performance. To explore the optimal calcination condition of MnOx/Al2O3 catalysts for NO oxidation, a series of samples was prepared using the same support and active compound but under different calcination conditions. The catalytic efficiency of the catalyst was tested, and through characterization [X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FE SEM), Brunauer–Emmett–Teller analysis (BET), and Barrett–Joyner–Halenda analysis (BJH)], the effect of calcination conditions on the catalytic performance was analyzed and discussed. The results showed that the samples calcined at 600°C for 5 h had the best catalytic performance. At a reaction temperature of 450°C, the molar ratio of NO2/NO conversion was as much as 1.65. The high surface area, crystal phase, and crystallinity (the relative content of Mn2O3 is about 50%); the high content of lattice oxygen Oβ (about 20.4%); and high dispersion of active sites on the MnOx/Al2O3 catalyst calcined at 600°C for 5 h led to its relatively high catalytic activity. Compared with traditional noble metal catalysts, the MnOx/Al2O3 catalyst prepared by the impregnation method has good application prospects because of its low material cost, simple preparation process, and superior catalytic performance. | |
