Show simple item record

dc.contributor.authorLan Cui
dc.contributor.authorQian Sheng
dc.contributor.authorYou-Kou Dong
dc.contributor.authorMing-Xing Xie
dc.contributor.authorJue-Hao Huang
dc.date.accessioned2022-02-01T00:24:19Z
dc.date.available2022-02-01T00:24:19Z
dc.date.issued7/1/2021
dc.identifier.other%28ASCE%29GM.1943-5622.0002038.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4271383
dc.description.abstractSupport damage is a typical hazard scenario associated with tunnel boring machine (TBM) drives in the squeezing rock condition. The stress release of the rock mass and the improvement of the support capacity are two effective methods to prevent support damage. The stress in the rock mass can be released by allowing a certain amount of overexcavation. The support capacity can be evaluated by solving the required support pressures corresponding to different critical strain levels. This paper aims to achieve a better understanding of preventing support damage for TBMs in the squeezing condition by quantitatively analyzing the overexcavation and the required support pressure. A semianalytical solution of the ground reaction curve is obtained. A simplified method of solving the support pressure with specific rock displacement is proposed. Based on the two solutions, the procedures for solving for the overexcavation and the critical support pressure are presented. Corresponding to the critical strain levels of 1%, 2.5%, 5%, and 10%, the response surfaces for critical support pressures in relation to the Geological Survey Index (GSI) and in situ stress are obtained via the nonlinear regression method. The influences of GSI, in situ stress, and the mechanical parameters of the concrete lining and shield on the size of the overexcavation are comprehensively investigated. A method to guide support design in the squeezing rock mass is proposed. Three tunnel cases are presented to demonstrate the application of the method, and three case histories that encounter support failures are discussed to illustrate the appropriate design measures through the proposed method.
dc.publisherASCE
dc.titleSemianalytical Analysis of Overexcavation and Critical Support Pressure for Support Design in TBM Tunneling through Squeezing Rock Condition
dc.typeJournal Paper
dc.journal.volume21
dc.journal.issue7
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0002038
dc.journal.fristpage04021097-1
dc.journal.lastpage04021097-18
dc.page18
dc.treeInternational Journal of Geomechanics:;2021:;Volume ( 021 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record