Show simple item record

dc.contributor.authorSoheil Ghadr
dc.contributor.authorAlireza Samadzadeh
dc.contributor.authorHadi Bahadori
dc.contributor.authorBrendan C. O’Kelly
dc.contributor.authorArya Assadi-Langroudi
dc.date.accessioned2022-02-01T00:22:52Z
dc.date.available2022-02-01T00:22:52Z
dc.date.issued6/1/2021
dc.identifier.other%28ASCE%29GM.1943-5622.0002002.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4271347
dc.description.abstractThe contractive behavior and flow failure in saturated binary granular soils have been studied by many as functions of their physical properties [gradation, mean particle size, fines content (FC), and packing quality] and mean effective stress, stress history, and cyclic stress amplitude. Nevertheless, little is known on the interplays between frame elements and fines in loose saturated geocomposite mixtures and also between virgin and added frame elements under cyclic loading. That knowledge shortfall has lent uncertainty to flow potential and compressibility predictions for saturated sands in their natural and engineered forms. In this paper, 36 cyclic undrained triaxial-compression tests were performed to investigate the cyclic behavior and properties of saturated loose sand–silt–tire-derived ground rubber (GR) mixtures and to determine the effects of the GR and almost nonplastic fines on the rate of pore-water pressure buildup. The complex interplay among the angular sand, fines (silt) and GR solids, and pore spaces of varied shape, size, and rigidity are discussed at a microscale and invoking the framework of two conceptual models, small silt and large silt. The control of FC on liquefaction resistance was found to be dependent on the sand and GR particle sizes. The relatively greater elasticity of GR than sand lends a damping effect to frame elements and further improves the liquefaction resistance through relaxation of skeletal stresses and reduces the chance of contact destruction for sand particles.
dc.publisherASCE
dc.titleLiquefaction Resistance of Silty Sand with Ground Rubber Additive
dc.typeJournal Paper
dc.journal.volume21
dc.journal.issue6
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0002002
dc.journal.fristpage04021076-1
dc.journal.lastpage04021076-18
dc.page18
dc.treeInternational Journal of Geomechanics:;2021:;Volume ( 021 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record