Show simple item record

dc.contributor.authorSmrutirekha Sahoo
dc.contributor.authorBappaditya Manna
dc.contributor.authorK. G. Sharma
dc.date.accessioned2022-02-01T00:21:57Z
dc.date.available2022-02-01T00:21:57Z
dc.date.issued4/1/2021
dc.identifier.other%28ASCE%29GM.1943-5622.0001981.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4271328
dc.description.abstractA series of shaking table tests will be carried out on 0.4 m high instrumented soil nailed embankments. The important parameters considered in this study consist of a combination of three different slope angles (β = 30°, 45°, and 60°), three different nail inclinations (i = 0°, 15°, and 30°), and three nail lengths (l = 0.2, 0.3, and 0.4 m). This study revealed that the effect of slope angle on the seismic resistance of steep nailed soil slopes was significant and the minimal magnitude of the facing displacement was obtained with nail inclinations of 0° and 15° for the nailed slopes without facing and with facing, respectively. A model nailed slope with a nail inclination of 15° provided better reinforcement action than the horizontally and 30° inclined nails when stabilizing soil slopes. The maximum axial nail force was obtained at approximately two-thirds of the nail length in the model slopes with facing and at the slope facing for model slopes without facing.
dc.publisherASCE
dc.titleShaking Table Tests to Evaluate the Seismic Performance of Soil Nailing Stabilized Embankments
dc.typeJournal Paper
dc.journal.volume21
dc.journal.issue4
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001981
dc.journal.fristpage04021036-1
dc.journal.lastpage04021036-14
dc.page14
dc.treeInternational Journal of Geomechanics:;2021:;Volume ( 021 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record