Show simple item record

dc.contributor.authorZhen Zhang
dc.contributor.authorJiangting Liu
dc.contributor.authorGuanbao Ye
dc.contributor.authorZhenning Liang
dc.contributor.authorZhiyu He
dc.date.accessioned2022-02-01T00:20:18Z
dc.date.available2022-02-01T00:20:18Z
dc.date.issued3/1/2021
dc.identifier.other%28ASCE%29GM.1943-5622.0001938.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4271286
dc.description.abstractPressure-dispersed compression anchor consists of several anchor units fitted with an end plate. Limited field tests have been conducted to investigate the performance of a pressure-dispersed compression anchor system in cohesive soil. This paper conducted a series of field pullout loading test of pressure-dispersed compression anchors in clay soils, considering the following influence factors of stressing sequence, grouting method and compensation load. The simultaneous stressing yielded less pullout capacity than the individual stressing because of the relatively large interaction between the units. With the increase of the load level, the movement ratio decreased with a gradually decreased rate, followed by a slight increase when the load level exceeded 0.7. The rebound stiffness declined as the load level increased and the individual stressing yielded smaller reduction in the rebound stiffness than the simultaneous stressing. The back calculation indicated that the effective anchor diameter was enlarged by 10% due to the post grouting with a grouting factor of 0.2.
dc.publisherASCE
dc.titlePerformance Tests on Pressure-Dispersed Compression Anchors in Cohesive Soils
dc.typeJournal Paper
dc.journal.volume21
dc.journal.issue3
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001938
dc.journal.fristpage04021012-1
dc.journal.lastpage04021012-11
dc.page11
dc.treeInternational Journal of Geomechanics:;2021:;Volume ( 021 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record