| dc.contributor.author | KyoungSub Park | |
| dc.contributor.author | Chatchai Jiansinlapadamrong | |
| dc.contributor.author | Shih-Ho Chao | |
| dc.date.accessioned | 2022-01-31T23:50:02Z | |
| dc.date.available | 2022-01-31T23:50:02Z | |
| dc.date.issued | 7/1/2021 | |
| dc.identifier.other | %28ASCE%29ST.1943-541X.0003057.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4270430 | |
| dc.description.abstract | Hollow structural sections (HSSs) are highly efficient in resisting compression, torsion, and bending. Their high torsional rigidity generally eliminates lateral-torsional buckling (LTB), which in turn eliminates the need for lateral bracing in flexural members. As a result, their plastic rotational capacity is mainly governed by flange local buckling (FLB) and web local buckling (WLB). Moment-resisting connections for single-HSS flexural members can be complicated. This study investigates the behavior of double-HSS flexural members under large displacement reversals. The study configuration consists of a double-HSS beam connected to a column through a center gusset plate secured by flare-bevel groove welds. The advantages of the proposed double-HSS moment connection are: (1) compared to a single-HSS, it effectively reduces the width-thickness ratios (b/t) of the flanges by using a double-HSS, thereby considerably increasing the member’s compactness and ductility; (2) it provides simple and practical connection details between the beam and column; and (3) it eliminates the need for lateral bracing. In addition, on-site welding can be eliminated by using shop-welded double-HSS beam-column stubs spliced by a bolted end connection. Experimental tests indicate that the proposed double-HSS moment connections showed a stable response up to a story drift angle of approximately 0.07 rad for the HSS sizes tested. Nonlinear finite-element analyses, including fracture behavior via the extended finite-element method (XFEM), were used to simulate test results, and finite-element analysis (FEA) was used to formulate the design procedure for the center gusset plate and welds connecting the double-HSS beam and column flange. | |
| dc.publisher | ASCE | |
| dc.title | Double-HSS Seismic Resistant Beam-to-Column Moment Connections | |
| dc.type | Journal Paper | |
| dc.journal.volume | 147 | |
| dc.journal.issue | 7 | |
| dc.journal.title | Journal of Structural Engineering | |
| dc.identifier.doi | 10.1061/(ASCE)ST.1943-541X.0003057 | |
| dc.journal.fristpage | 04021098-1 | |
| dc.journal.lastpage | 04021098-17 | |
| dc.page | 17 | |
| dc.tree | Journal of Structural Engineering:;2021:;Volume ( 147 ):;issue: 007 | |
| dc.contenttype | Fulltext | |