Show simple item record

dc.contributor.authorJiepeng Liu
dc.contributor.authorTianxiang Xu
dc.contributor.authorXuanding Wang
dc.date.accessioned2022-01-31T23:49:21Z
dc.date.available2022-01-31T23:49:21Z
dc.date.issued6/1/2021
dc.identifier.other%28ASCE%29ST.1943-541X.0003037.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4270411
dc.description.abstractThin-walled steel tubes are highly recommended to be used in concrete-filled steel tube (CFST) columns due to their economic benefits. However, the inherent difficulty of connections between the steel tube and foundation limits the application of thin-walled CFSTs. Four types of CFST column-to-foundation connections employing anchor bars to resist the bending moment are proposed, avoiding the insertion of the steel tube into the foundation. In this paper, the design method for the proposed column-to-foundation connections was first studied. Eight column-to-foundation connections for thin-walled CFST columns were tested under combined constant axial load and cyclic lateral load. The observed failure modes, load-displacement hysteresis curves, load-displacement skeleton curves, circumferential stiffness, energy-dissipation coefficient, and load-strain curves of steel tube were analyzed and presented. The experimental results and theoretical analyses indicated that properly designed connections possessed higher bending strength and better ductility than traditional embedded connections.
dc.publisherASCE
dc.titleSeismic Behavior and Design of Concrete-Filled Thin-Walled Steel Tube Column-to-Foundation Connections
dc.typeJournal Paper
dc.journal.volume147
dc.journal.issue6
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0003037
dc.journal.fristpage04021072-1
dc.journal.lastpage04021072-17
dc.page17
dc.treeJournal of Structural Engineering:;2021:;Volume ( 147 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record