Show simple item record

dc.contributor.authorRyota Matsui
dc.contributor.authorKoichi Koizumi
dc.contributor.authorPao-Chun Lin
dc.contributor.authorMasanobu Iwanaga
dc.contributor.authorAn-Chien Wu
dc.contributor.authorToru Takeuchi
dc.contributor.authorKeh-Chuyan Tsai
dc.date.accessioned2022-01-31T23:48:28Z
dc.date.available2022-01-31T23:48:28Z
dc.date.issued7/1/2021
dc.identifier.other%28ASCE%29ST.1943-541X.0003017.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4270389
dc.description.abstractThis paper introduces a grid-purlin system, which was composed of secondary rectangular-hollow-section grids welded onto the top flange of I-shaped beams of moment frames. The welded grid-purlin itself may play a role of a lateral bracing member for the welded beam. However, the ultimate strength, plastic rotation capacity, or other structural characteristics of this grid-purlin system remain poorly understood. This paper presents two full-scale cyclic loading tests on specimens with I-shaped beams 700 mm deep, 240 mm wide, and 13 m long. The diagonal length of grids in the square grid-purlin of the specimen was 1.3 m on-center, and two different depths of the sections were selected for the purlin sections. Both specimens successfully achieved fully plastic moments at a plastic rotation exceeding 0.04 rad. This shows that the grid-purlin system provides reliable lateral bracing. Continuum finite-element (CFE) analysis was performed to simulate the hysteretic experimental response of the grid-purlin system. This CFE model was used to examine the plastic rotation capacity for a variety of combinations of I-shaped beams and grid-purlins.
dc.publisherASCE
dc.titleStrength and Plastic Rotation Capacity of I-Shaped Beams with Grid-Purlin System Subjected to Cyclic Loading
dc.typeJournal Paper
dc.journal.volume147
dc.journal.issue7
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0003017
dc.journal.fristpage04021103-1
dc.journal.lastpage04021103-10
dc.page10
dc.treeJournal of Structural Engineering:;2021:;Volume ( 147 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record