Show simple item record

dc.contributor.authorDong-Won Kim
dc.contributor.authorChia-Ming Uang
dc.date.accessioned2022-01-31T23:48:18Z
dc.date.available2022-01-31T23:48:18Z
dc.date.issued6/1/2021
dc.identifier.other%28ASCE%29ST.1943-541X.0003012.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4270384
dc.description.abstractPlate girders, usually characterized by having large depth-to-web thickness ratios, have been widely used for long-span applications in bridges and buildings. US design provisions (AISC specifications for building design and AASHTO specifications for bridge design) permit the strength contribution from tension-field action after web buckling in calculating the design shear strength of interior panels, but not exterior panels. Testing of four large-size steel plate girders demonstrated a much higher shear resistance of end panels than those predicted by code provisions. Based on the failure mode observed from both testing and finite element simulation, an analytical model was developed to simulate the collapse mechanism. Plastic analysis was used to derive a shear strength equation. This equation, similar in format to that used in current design codes for interior panels, includes a parameter βv to account for the contribution of partial tension-field action.
dc.publisherASCE
dc.titleShear Strength of End Panels in Steel Plate Girders
dc.typeJournal Paper
dc.journal.volume147
dc.journal.issue6
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0003012
dc.journal.fristpage04021063-1
dc.journal.lastpage04021063-14
dc.page14
dc.treeJournal of Structural Engineering:;2021:;Volume ( 147 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record