Show simple item record

dc.contributor.authorKaveh Andisheh
dc.contributor.authorAllan Scott
dc.contributor.authorAlessandro Palermo
dc.date.accessioned2022-01-31T23:48:00Z
dc.date.available2022-01-31T23:48:00Z
dc.date.issued7/1/2021
dc.identifier.other%28ASCE%29ST.1943-541X.0003005.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4270376
dc.description.abstractAn analytical model is proposed to predict the stress–strain relationship of confined concrete subjected to reinforcement corrosion. The stress–strain graph of confined concrete with corroded reinforcement was predicted using estimation of four key parameters: maximum compressive stress, strain at maximum compressive stress, modulus of elasticity of concrete, and ultimate compressive strain of concrete. To validate the model, analytically predicted stress–strain curves of confined concrete of circular RC columns damaged due to corroded reinforcement were compared with those obtained from full-scale experimental tests with varying degrees of corrosion. The results of the comparison indicate good agreement. The RC columns had identical size, the same longitudinal steel reinforcement and spiral confinement type but with different spiral pitches providing varying levels of confinement. The corroded RC columns were categorized into four corrosion groups: noncorroded, low corrosion, high corrosion, and mechanical pitting corroded. The presented model is based on a modified version of the Mander’s universal model for RC columns.
dc.publisherASCE
dc.titleEffects of Corrosion on Stress–Strain Behavior of Confined Concrete
dc.typeJournal Paper
dc.journal.volume147
dc.journal.issue7
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0003005
dc.journal.fristpage04021087-1
dc.journal.lastpage04021087-16
dc.page16
dc.treeJournal of Structural Engineering:;2021:;Volume ( 147 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record