Show simple item record

dc.contributor.authorXia Yan
dc.contributor.authorJean C. Batista Abreu
dc.contributor.authorRobert S. Glauz
dc.contributor.authorBenjamin W. Schafer
dc.contributor.authorThomas Gernay
dc.date.accessioned2022-01-31T23:47:30Z
dc.date.available2022-01-31T23:47:30Z
dc.date.issued4/1/2021
dc.identifier.other%28ASCE%29ST.1943-541X.0002990.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4270362
dc.description.abstractThe objective of this paper is to propose relationships for the reduction in mechanical properties of cold-formed steels at elevated temperature. Predicting the degradation of strength and modulus of cold-formed steels with temperature is critical to enable fire design of cold-formed steel members. Here, the properties of elastic modulus, 0.2% proof stress, 2% stress, and ultimate stress are studied for grades up to and including 550 MPa. Data are collected from the literature as well as from recent tests conducted by the authors at Johns Hopkins University. Steady-state and transient test results in the range of 20°C–1,000°C are analyzed. Retention factors are then proposed for the mechanical properties adopting a standardized format developed through committee work with the American Iron and Steel Institute.
dc.publisherASCE
dc.titleSimple Three-Coefficient Equation for Temperature-Dependent Mechanical Properties of Cold-Formed Steels
dc.typeJournal Paper
dc.journal.volume147
dc.journal.issue4
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002990
dc.journal.fristpage04021035-1
dc.journal.lastpage04021035-10
dc.page10
dc.treeJournal of Structural Engineering:;2021:;Volume ( 147 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record