Show simple item record

dc.contributor.authorSeyed Mohammad Mojtabaei
dc.contributor.authorJurgen Becque
dc.contributor.authorIman Hajirasouliha
dc.date.accessioned2022-01-31T23:47:26Z
dc.date.available2022-01-31T23:47:26Z
dc.date.issued4/1/2021
dc.identifier.other%28ASCE%29ST.1943-541X.0002987.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4270359
dc.description.abstractThe use of cold-formed steel (CFS) elements in residential and industrial buildings is widely gaining popularity due to their ability to provide cost-effective and sustainable solutions. A high degree of flexibility in the manufacturing of various cross-sectional shapes provides a unique opportunity to further improve the load-carrying capacity of these elements through an optimization process, leading to more efficient and economical structural systems. This paper aims to offer a practical methodology for the optimum design of CFS beam-column members with different lengths and thicknesses, subject to various combinations of axial compression and bending moment, but with constant material use. The optimization process is carried out using a genetic algorithm and aims to maximize the resistances of CFS members, determined according to the European design guidelines (Eurocode 3). Six initial prototype cross sections, including both single and built-up channel sections, are selected and their relative dimensions and edge stiffener configurations are allowed to vary during the optimization process. To ensure practically relevant solutions Eurocode 3 slenderness constraints, as well as a range of practical manufacturing and construction limitations, are imposed on the cross sections. Standard commercially available single and back-to-back lipped channel sections are taken as the starting points of the optimization and used to benchmark the efficiency of the optimized sections. Significant gains in capacity (of up to 156% in the present study) can be obtained compared to the initial cross sections, while the optimization results also offer further insights on the material efficiency achievable with various cross-sectional shapes in combined loading scenarios ranging from pure bending to pure compression.
dc.publisherASCE
dc.titleStructural Size Optimization of Single and Built-Up Cold-Formed Steel Beam-Column Members
dc.typeJournal Paper
dc.journal.volume147
dc.journal.issue4
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002987
dc.journal.fristpage04021030-1
dc.journal.lastpage04021030-14
dc.page14
dc.treeJournal of Structural Engineering:;2021:;Volume ( 147 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record