Show simple item record

dc.contributor.authorBin Zhang
dc.contributor.authorJianbo Zhou
dc.contributor.authorWansi Fu
dc.contributor.authorMei Luo
dc.contributor.authorWei Yan
dc.contributor.authorFeihu Chang
dc.contributor.authorYanhe Liu
dc.contributor.authorPengfei Jiang
dc.date.accessioned2022-01-31T23:46:59Z
dc.date.available2022-01-31T23:46:59Z
dc.date.issued4/1/2021
dc.identifier.other%28ASCE%29ST.1943-541X.0002976.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4270348
dc.description.abstractIn this study, glue-pressed engineered honeycomb bamboo (GPEHB) was prepared, and the dependence of the compressive properties of the produced GPEHB on the load–slenderness ratio, longitudinal strain–slenderness ratio, and ultimate strain–slenderness ratio was examined. The detailed failure modes were also investigated. The main failure modes of the short GPEHB specimens were squashing, crushing, and splitting, and the bearing capacity was mainly dependent on the compressive strength of the bamboo units. Buckling failure modes involving significant lateral deflection were observed for the long GPEHB specimens. With increasing slenderness ratio, the bearing capacities of the GPEHB specimens decreased significantly. The ultimate load of the GPEHB specimens decreased significantly as the slenderness ratio increased from 4 to 6 (GPEHB length increased from 736 to 1,104 mm). The ultimate deformation behaviors of the specimens were fit well by a quadratic function of the slenderness ratio. The GPEHB was also analyzed and modeled via finite element analysis (FEA). The experimental results, theoretical calculations, and FEA analysis results were compared.
dc.publisherASCE
dc.titleMechanical Performance of Glue-Pressed Engineered Honeycomb Bamboo under Axial Compression
dc.typeJournal Paper
dc.journal.volume147
dc.journal.issue4
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002976
dc.journal.fristpage04021034-1
dc.journal.lastpage04021034-9
dc.page9
dc.treeJournal of Structural Engineering:;2021:;Volume ( 147 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record