Show simple item record

dc.contributor.authorKeyang Ning
dc.contributor.authorLu Yang
dc.contributor.authorHuiyong Ban
dc.date.accessioned2022-01-31T23:46:19Z
dc.date.available2022-01-31T23:46:19Z
dc.date.issued4/1/2021
dc.identifier.other%28ASCE%29ST.1943-541X.0002958.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4270328
dc.description.abstractThis study investigated the seismic performance of welded stainless steel H-section columns. Ten columns were tested under cyclic horizontal load; their seismic performance was analyzed according to their hysteresis curves, degree of plasticity, and energy dissipation capacity. The test results obtained were used to validate the developed finite-element (FE) model, which was later utilized in parametric studies. In the tests, it was found that the final failure form of all test columns was local buckling. Slenderness of the component plates and axial load ratio were the governing factors which affected the development of plasticity within the cross sections, the energy dissipation density, and the ductility coefficient. The cross-section classification in the relevant European code is discussed in this paper. Based on numerical data, a ductility-based design approach is proposed, which can provide a reference for the seismic design of welded stainless steel H-section columns.
dc.publisherASCE
dc.titleSeismic Performance of Welded Stainless Steel H-Section Columns under Cyclic Horizontal Loading
dc.typeJournal Paper
dc.journal.volume147
dc.journal.issue4
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002958
dc.journal.fristpage04021016-1
dc.journal.lastpage04021016-11
dc.page11
dc.treeJournal of Structural Engineering:;2021:;Volume ( 147 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record