Show simple item record

dc.contributor.authorMinh Toan Huynh
dc.contributor.authorCao Hung Pham
dc.contributor.authorColin A. Rogers
dc.contributor.authorGregory J. Hancock
dc.date.accessioned2022-01-31T23:45:44Z
dc.date.available2022-01-31T23:45:44Z
dc.date.issued3/1/2021
dc.identifier.other%28ASCE%29ST.1943-541X.0002937.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4270311
dc.description.abstractTwo test series were carried out on angle cleat connections between cold-formed channels as beams and rectangular hollow sections as support members. The objective of the tests was to determine the effect of connection rotation from the beam on the shear capacity of the connection. Self-drilling screws were used to attach the channels to the angle cleats with the failure limit states always occurring in this part of the connection. A dual actuator test apparatus that could apply controlled displacement and rotation to the beams was used. The specimens contained different thicknesses of the channels, which allowed for two limit states involving failure modes of the screws fracturing in shear and bearing as well as tilting failure of the screws in the channel sheet material. The experimental results show the effect of rotation on reducing the shear capacity of the screwed connections. An analytical model for the connection is developed using the relation between the bearing force and deformation of the individual screw connections.
dc.publisherASCE
dc.titleStructural Behavior of Screwed Connections in Cold-Formed Steel Beams
dc.typeJournal Paper
dc.journal.volume147
dc.journal.issue3
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002937
dc.journal.fristpage04020354-1
dc.journal.lastpage04020354-20
dc.page20
dc.treeJournal of Structural Engineering:;2021:;Volume ( 147 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record