Show simple item record

dc.contributor.authorNathaniel I. Cox
dc.contributor.authorScott E. Hamel
dc.date.accessioned2022-01-31T23:45:14Z
dc.date.available2022-01-31T23:45:14Z
dc.date.issued2/1/2021
dc.identifier.other%28ASCE%29ST.1943-541X.0002915.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4270295
dc.description.abstractStructural insulated panels (SIPs) are thermally efficient, prefabricated structural elements that expedite on-site construction with a minimal number of skilled workers. This research aimed to model the time-independent mechanical response of transversely loaded SIPs with plywood skins and a closed-cell rigid polyurethane foam core. The foam core was characterized in both shear and compression through experimental testing, and a trilinear strain-based constitutive model was found suitable for the shear, while a linear response was adequate for compression. Two models, one analytical the other numerical, were produced using the component behavior and validated by comparison to the results of full-scale SIPs experimentally tested in quarter-point bending at two spans, 2.40 and 3.65 m. The analytical model is based on thin-faced, antiplane-core sandwich beam theory, while the numerical model is a two-dimensional plane-strain finite-element model (FEM). Good agreement was found between the analytical model and full-scale bending tests. However, it was found that the experimentally observed polyurethane shear moduli had to be reduced to 77% of their original values to provide good agreement of the FEM with the full-scale bending tests. While both models accurately predicted the bending deflection of the panels, neither was able to satisfactorily predict ultimate strength.
dc.publisherASCE
dc.titleStatic Modeling of Plywood–Polyurethane Structural Insulated Panels in Bending
dc.typeJournal Paper
dc.journal.volume147
dc.journal.issue2
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002915
dc.journal.fristpage04020334-1
dc.journal.lastpage04020334-11
dc.page11
dc.treeJournal of Structural Engineering:;2021:;Volume ( 147 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record