Show simple item record

dc.contributor.authorJianhan Yu
dc.contributor.authorTed Stathopoulos
dc.contributor.authorMingshui Li
dc.date.accessioned2022-01-31T23:45:09Z
dc.date.available2022-01-31T23:45:09Z
dc.date.issued3/1/2021
dc.identifier.other%28ASCE%29ST.1943-541X.0002913.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4270293
dc.description.abstractExposure roughness is significant in the evaluation of design wind loads. The roughness length (z0) is a key parameter to determine the exposure coefficient. In current wind load provisions, z0 is determined generally according to the exposure categories. However, subjective interpretation of upstream roughness by designers may lead to disagreements of exposure type. To address this issue, a more accurate method of determining the value of z0 is proposed in this paper. This approach uses morphometric methods in combination with the application of Google Earth Pro or equivalent. A three-dimensional modeling methodology is proposed which is based on the two-dimensional images captured in Google Earth Pro. The city center of London, UK and Tampa International Airport, US are chosen as case studies to verify the accuracy of the proposed method by comparison with available measured data. The comparison shows that this method works well for the estimation of z0 of upstream exposure.
dc.publisherASCE
dc.titleEstimating Exposure Roughness Based on Google Earth
dc.typeJournal Paper
dc.journal.volume147
dc.journal.issue3
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002913
dc.journal.fristpage04020353-1
dc.journal.lastpage04020353-12
dc.page12
dc.treeJournal of Structural Engineering:;2021:;Volume ( 147 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record