Show simple item record

dc.contributor.authorXiao Ding Bu
dc.contributor.authorFei Wei
dc.contributor.authorJeffrey A. Packer
dc.date.accessioned2022-01-30T22:45:35Z
dc.date.available2022-01-30T22:45:35Z
dc.date.issued1/1/2021
dc.identifier.other(ASCE)ST.1943-541X.0002864.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4269545
dc.description.abstractThe design of welded rectangular hollow section (RHS) truss-type connections, in which branches are laterally offset from the chord centerline, is not included in any of the current design codes and standards. To provide design recommendations for this type of connection, a series of studies have been performed on cold-formed welded RHS-to-RHS X-connections with branch lateral offset. An experimental study of 14 full-scale laboratory tests has been conducted, including 4 nonoffset control specimens and 10 laterally offset specimens. Two failure mode models representing the behavior of such connections have been proposed, and their validity is evaluated by the experimental results. Following the experimentation, a numerical study with a broader range of parameters was performed on such RHS connections, where nonlinear finite element (FE) models were created and validated against the laboratory tests. Based on the results of the experimental and numerical studies, one of the analytical models—a combined yield-line mechanism—is recommended to be used for the design of laterally offset RHS X-connections.
dc.publisherASCE
dc.titleLaterally Offset RHS X-Connections
dc.typeJournal Paper
dc.journal.volume147
dc.journal.issue1
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0002864
dc.journal.fristpage04020286
dc.journal.lastpage04020286-18
dc.page18
dc.treeJournal of Structural Engineering:;2021:;Volume ( 147 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record